SPL Reference System with 120V VOLTAiR technology

This system is for the person that is looking for ultimate Reference Audio System in a small package with massive dynamic range (140db)

Here is the example of SPl vs other systems....The output of a DAC chip is either a voltage or current (as in our design) that represents the value presented on their digital inputs. This output is to be converted to voltage (in case of a current output) and filtered with a low pass filter. These two stages are typically designed with the same reference voltage of the DAC chip at e.g. 5V. Think about this: the first stage that the analog waveform is exposed to has a headroom limited to 5V. Now imagine this to be 120V! This is what we have done in the Director. The current to voltage conversion as well as the low pass filter are both running on a 120V rail - our VOLTAiR technology. The incredible headroom and the enormous power lets the analog wavefront come to life and evolve without limitations. And that is audible. Very much so. .

Pair this up with all the components and you have a true super dynamic system with no bottle necks in the audio.

Frequency range (analog): 4 Hz to 300 kHz (-3 dB)
THD: 0,0008 % (analog), 0,0004 % (digital)

The Focal Kanta No1 is the smallest of the Kanata line and has the latest in Focal technology to have no smear in the signal.

For cable you will want the best you can afford to maximize this system. 1 Pair of analog interconnects per component (Besides power amp), and a pair of speaker cables is all you need to get started. We suggest Vovox Sonorus or Excelsus