Aviom D400-Dante

Aviom D400-Dante A-Net Distributor: Unleash Dante Connectivity for Personal Mixing Systems

Effortless Dante Integration, Powerful Performance

The Aviom D400-Dante A-Net Distributor is your gateway to seamless Dante connectivity within your personal mixing system. It not only provides power but also distributes a pristine digital audio stream to your Aviom Personal Mixers using standard Cat-5e cables.

Choose Your Fit

• D400 (Standard): Designed with an A-Net input, ideal for analog input modules or digital console cards from Aviom or third-party partners.
• D400-Dante: Features a Dante input, enabling routing of up to 32 channels from a Dante-enabled console or digital audio network to the Personal Mixers.

Streamlined Setup, Impressive Performance

For audio systems leveraging Dante, the D400-Dante is an excellent choice for straightforward connectivity to a Dante network. It allows you to handpick any 32 channels from your 44.1/48kHz Dante network and assign them to your Aviom Personal Mixers.

More Channels, More Creativity

When used alongside the SB4 System Bridge and Pro16 A-Net console cards (like the Y1 A-Net Card for Yamaha®), the D400-Dante merges up to four 16-channel A-Net streams, enabling the direct transfer of up to 64 channels from your digital console to your Aviom personal mixers. Each A360 Personal Mixer can independently select mix channels, empowering every musician to craft their ideal mix.

Expand Your System with Ease

If your setup requires more than eight Personal Mixers, both the D400 and D400-Dante feature an A-Net Out port—ideal for routing the incoming audio stream (regardless of its original source) to additional A-Net Distributors. There's practically no limit to the number of A-Net Distributors and Personal Mixers you can incorporate into your system.

Simplified Stereo Links

Stereo Links, a potent feature on A320 and A360 Personal Mixers, allow you to assign a pair of adjacent channels to a single mix channel button. The D400 and D400-Dante offer the convenience of configuring stereo links using DIP switches on the A-Net Distributor's front panel, eliminating the need to do so at the input device.

Technical Specifications

• A-Net Out to Personal Mixers: Eight RJ45 connectors, powered
• A-Net Out: Pro16e A-Net; RJ45 connector, unpowered
• LEDs: Power On (red); Network Sync (green)
• Stereo Link: Two 8-position DIP switch blocks (1-16, 17-32)
• Output Voltage for Personal Mixers: 24VDC, 0.5 amp, Transmitted over the Cat-5e cable
• A-Net Cables: Front Panel Connections: Shielded Cat-5e (or better) cable
• Power Supply: Internal, IEC connector
• Input Voltage: 100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max
• AC Fuse Types: 115V range: T2.5AL/250V; 230V range: T1.25AL/250V
• Dimensions: 19" (482.6 mm) wide x 7.25" (182 mm) deep; 2U, 3.5" (88.9 mm) high
• Weight: 12.0 lbs (5.44 kg)
• Dante Interface: 32 channels (44.1/48kHz Sample Rate)
• Dante Primary I/O: RJ45 connector
• Dante Secondary I/O: RJ45 connector
• Dante LEDs: Network Activity (green); 1GB Network Connection Active (yellow)

Seamless Dante Integration with Aviom D400-Dante A-Net Distributor. Streamline Connectivity, Elevate Performance!